歡迎來到溫州昌力機械有限公司│◕│╃!

返回首頁

諮詢熱線:0577-65987363

分切機系列當前位置╃↟↟✘₪:首頁分切機系列

CLFQ-D2600型高速表面卷取復卷分切機

釋出日期╃↟↟✘₪:[2022-06-06]     點選率╃↟↟✘₪:

主要技術引數Main Technical Parameters╃↟↟✘₪: 

可根據產品要求 特殊訂製裝置◕•╃▩•。


適用範圍╃↟↟✘₪:

表面卷取復卷分切機適用於捲筒紙╃✘、塑膠片╃✘、鋁箔╃✘、PVC╃✘、塑膠薄膜╃✘、無紡布╃✘、熔噴布╃✘、絕緣材料等包裝材料的分條復卷是對材料進行細小規格分切的理想裝置◕•╃▩•。


效能及特點 ╃↟↟✘₪:

1.放卷自動超聲波糾偏╃✘、採用無軸液壓上下料✘•,左右間距調節均由液壓完成✘•,磁粉自動張力控制◕•╃▩•。

2.收卷由兩臺向量電機驅動與主機聯動控制中心卷取與表面接觸並用✘•,雙軸交叉收卷✘•,永不

咬口◕•╃▩•。

3.主機傳動由變頻器控制✘•,變頻電機驅動✘•,加減速穩定快速◕•╃▩•。

4..並設有預置自動計米✘•,計算卷徑✘•,報警停機等功能◕•╃▩•。

5.採用圓刀直刀縱切✘•,分切盤面整齊✘•,廢邊自動排除◕•╃▩•。

6.整機由PLC觸控式螢幕人機介面自動張力控制◕•╃▩•。


Scope of application

The surface coiling and rewinding slitting machine is suitable for the stripping and rewinding of packaging materials such as web, plastic sheet, aluminum foil, PVC, Non-woven fabric, meltblown fabric ,plastic film and insulating material. It is an ideal equipment for fine-cutting materials.

Performance and characteristics

1.The unwinding is automatically rectified by ultrasonic wave, and the shaftless hydraulic loading and unloading is adopted. The adjustment of the left and right spacing is completed by hydraulic pressure, and the magnetic powder is automatically controlled by tension.

2. The winding is driven by two vector motors and the main engine linkage control center is used for winding and surface contact, and the two-axis cross winding is performed, never biting.

3. The main drive is controlled by the inverter, driven by the variable frequency motor, and the acceleration and deceleration is stable and fast.

4. There are preset automatic meter counting, calculation of coil diameter, alarm shutdown and other functions.

5. Longitudinal cutting with a round knife, the cutting surface is neat, and the waste edge is automatically eliminated.

6. The whole machine is controlled by the automatic tension of the PLC touch screen man-machine interface.

上一張╃↟↟✘₪:分切機系列
下一張╃↟↟✘₪:CLFQ-HW型電腦高速自動分切機

聯絡我們

瞭解更多我們詳細資訊✘•,請致電
13868813586

13967793790

溫州昌力機械有限公司

手 機╃↟↟✘₪:13868813586/13967793790

電 話╃↟↟✘₪:(86)577-65987363

地 址╃↟↟✘₪:浙江省瑞安市上望街路頭工業區10-1號

E-mail:1480550208@qq.com

掃一掃關注我們

返回首頁

Copyright © 2018 溫州昌力機械有限公司. All Rights Reserved. 浙ICP備18010182號-1 復卷機廠家, 分條機廠家主營╃↟↟✘₪: 全自動分切機 紙張分切機 高速分切機 薄膜分切機  

日本又黄又粗暴的gif动态图含羞,大学生宿舍飞机chinesevideo,天美传媒麻豆自制剧视频,美女mm131爽爽爽作爱视频